Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Strut Assembly - Secure
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Strut Assembly - Secure
Retainer (2) @ Wheelhouse - Secure
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Harness Pass Through Grommet (1) - Secure
Install the tire and wheel assembly. Tire and Wheel Removal and Installation
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Strut Tower - Secure
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Electrical Connector (1) - Connect
Reposition and install the radiator surge tank. - Radiator Surge Tank Replacement (LGX with V08) , or Radiator Surge Tank Replacement (LCV)
Verify the repair is complete. Diagnostic Repair Verification