Installation Procedure
- Generator (1) - Install
- Generator Bolt (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- Electrical Connector (2) - Connect
- Retainer (1) - Engage
- Battery Positive Cable (1) - Install
- Battery Positive Cable Nut (2) @ Generator - Install and tighten 15 N.m (11 lb ft)
- Drive Belt Tensioner - Install - Drive Belt Tensioner Replacement
- Accessory Drive Primary Belt - Install - Accessory Drive Primary Belt Replacement
- Air Cleaner Assembly (1) - Install - Air Cleaner Assembly Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution