Circuit/System Verification
- Drive the vehicle in a straight line at a speed greater than 40 km/h (25 MPH).
- Verify all scan tool Wheel Speed Sensor parameters are within 4 km/h (2.5 MPH) of each other.
- If any parameter is not within 4 km/h (2.5 MPH) of each other
Refer to Circuit/System Testing.
- Go to next step: If each parameter is within 4 km/h (2.5 MPH) of each other
- If any parameter is not within 4 km/h (2.5 MPH) of each other
- All OK.