LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2020 >> Canyon SL >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> Endgate Lock Malfunction >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the A23E Door Latch Assembly - Endgate.
  2. Install a 25 A fused jumper wire between one of the control terminals and 12 V. Momentarily install a jumper wire between the other control terminal and ground. Reverse the jumper wires at least two times, the A23E Door Latch Assembly - Endgate should perform the LOCK and UNLOCK function.
    • If the actuator does not perform the LOCK and UNLOCK function 

      Replace the A23E Door Latch Assembly - Endgate.

    • Go to next step: If the actuator performs the LOCK and UNLOCK function 
  3. All OK
scientia non olet · About LEMON Manuals