Removal Procedure
WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
- {If equipped} Front Suspension 4 Corner Leveling System Position Sensor (1) @ Front Lower Control Arm - Separate - Front Suspension 4 Corner Leveling System Position Sensor Replacement
- Front Lower Control Arm Ball Stud Nut (1) - Loosen
- Use the CH-42188-B
separator (1) to separate the front lower control arm from the steering knuckle.
- Front Lower Control Arm Ball Stud Nut (2) - Remove
- Front Lower Control Arm Front Bolt (1) - Remove [2x]
DISCARD the bolts.
- Front Lower Control Arm Rear Nut (1) - Remove [2x]
- Front Lower Control Arm Rear Bolt (2) - Remove [2x]
DISCARD the bolts.
- Remove the front lower control arm (1) from the vehicle.