LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Shift Lock Control System) >> Diagnostic Information And Procedures >> Transmission Control Lever Malfunction (With KL9) >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector:S3 Transmission Shift Lever
  3. Connect a 3 A fused jumper wire between the test points:Control terminal 4 & 12 V
  4. Momentarily connect a jumper wire between the test points:Ground terminal 2 & Ground

    Verify the component produces a clicking sound:M7 Transmission Shift Lock Control Solenoid Actuator

    • If the component does not produce a sound 

      Replace the component:S3 Transmission Shift Lever

    • Go to next step: If the component produces a sound 
  5. All OK.
scientia non olet · About LEMON Manuals