Removal Procedure
- Battery Negative Cable - Disconnect - Battery Negative Cable Disconnection and Connection (KL9)
- Fuse Block Cover(1) - Remove
- Starter Solenoid Cable Nut(1) - Remove
- Starter Solenoid Cable(2) - Reposition
- Battery Positive Cable Nut (1) - Remove
- Remove the small wire.
- Battery Positive Cable (2) - Remove
- Disconnect the body wiring harness connector. (1)
- Body Wiring Harness Terminal Nut (1) - Remove[4x]
- Generator and Starter Nut (2) - Remove
- Wiring Harness Terminal - Remove[5x]
- Unclip the fuse block tabs (1) and remove from the battery.