Component Testing
- Ignition/Vehicle - Off
- Disconnect the electrical connector:A23D Door Latch Assembly - Driver
- Test for infinite resistance between the test points:Signal terminal 2 & Ground terminal 3 - The switch is in the open position.
- If less than infinite resistance
Replace the component:A23D Door Latch Assembly - Driver
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 3 ohms between the test points:Signal terminal 2 & Ground terminal 3 - The switch is in the closed position.
- If 3 ohms or greater
Replace the component:A23D Door Latch Assembly - Driver
- Go to next step: If less than 3 ohms
- If 3 ohms or greater
- All OK.