Component Testing
- Ignition/Vehicle - Off
- Disconnect the appropriate electrical connector: B71R Liftgate Object Sensor - RightorB71L Liftgate Object Sensor - Left
- Test for 8k ohms to 12 kohms between the test points:Signal terminal 1 & Low Reference terminal 2 - Not Pressed
- If not between 8k and 12k ohms
Replace the component:B71R Liftgate Object Sensor - RightorB71L Liftgate Object Sensor - Left
- Go to next step: If between 8k and 12k ohms
- If not between 8k and 12k ohms
- All OK.