Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Steering Shaft Lock Plate Retaining Ring |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Automatic Transmission Control Bolt | 10 N.m (89 lb in) |
| Automatic Transmission Range Selector Lever Cable Lever Bolt | 20 N.m (15 lb ft) |
| Instrument Panel Knee Bolster Deflector Bolt | 9 N.m (80 lb in) |
| Intermediate Steering Shaft Lower Bolt | 45 N.m (33 lb ft) |
| Intermediate Steering Shaft Upper Bolt | 50 N.m (37 lb ft) |
| Steering Column Bolt Refer to procedure for tightening sequence and torque values. |
Steering Column Replacement |
| Steering Column Nut Refer to procedure for tightening sequence and torque values. |
Steering Column Replacement |
| Steering Column Seal Nut | 3 N.m (27 lb in) |
| Steering Column Shroud Bolt | 2.5 N.m (22 lb in) |
| Steering Wheel Nut | 37 N.m (27 lb ft) |
| Turn Signal Switch Bolt | 2.5 N.m (22 lb in) |
| Upper Intermediate Steering Shaft Nut | 62 N.m (46 lb ft) |