Installation Procedure
- Position the steering column in the uppermost tilted position.
Install the spring guide (1) into the tilt spring (2).
- WARNING:
The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and installation of the tilt spring and the spring guide.
Install the tilt spring (1) on the steering column using the following procedure:
- Install the tilt spring (1) onto the post on the steering column tilt head (3).
- Install the tilt spring (1) onto the post on the steering column (2).
- Remove the locking pliers.
- Steering Column Shroud - Install - Steering Column Shroud Replacement (Manual Tilt) Steering Column Shroud Replacement (Manual Tilt and Telescope)
- Instrument Panel Knee Bolster - Install - Instrument Panel Knee Bolster Replacement