LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Sierra 2500 HD Base, 2D Pickup, Gas >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.0L (L96 LC8) - Repair Instructions >> Repair Instructions >> Knock Sensor 1 Replacement >> Installation Procedure

Installation Procedure

  1. Position the knock sensor (718) to the engine block and install the knock sensor bolt (739). Tighten the bolt to 25 N.m (18 lb ft)
    GM1402136Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Connect the engine wiring harness electrical connector (4) to knock sensor.
    GM1699536Courtesy of GENERAL MOTORS COMPANY
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals