LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Sierra 2500 HD Base, 2D Pickup, Gas/Ethanol >> Repair and Diagnosis >> Steering >> Power Steering >> Repair Instructions >> Power Steering Control Module Wiring Harness Replacement (Heavy Duty) >> Installation Procedure

Installation Procedure

  1. GM4163351Courtesy of GENERAL MOTORS COMPANY

    Position the power steering control module wiring harness connector (3) on the steering gear.

  2. Connect the power steering control module wiring harness connector (2) to the electronic power steering motor control module.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the electronic power steering motor control module bracket bolt (1) and tighten to 15 N.m (11 lb ft).
  4. GM4163350Courtesy of GENERAL MOTORS COMPANY

    Connect the power steering control module wiring harness connector (1) to the steering gear pressure sensor.

  5. Install a NEW wiring harness retainer (2) and secure the wiring harnesses.
  6. Steering Gear Skid Shield - Install - Steering Gear Skid Shield Replacement
scientia non olet · About LEMON Manuals