LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Sierra 2500 HD Base, 2D Pickup, Gas/Ethanol >> Labor Times >> Other Variant >> Transmission >> Automatic Trans >> Transmission Assembly >> Removal & Installation

Removal & Installation

WARNING: This page is about the Sierra 2500 HD Base, 4D Pickup Crew Cab, 6.0L Eng VIN B, 4WD, Gas/Ethanol, which is a different variant/trim than selected.

TRANS ID - 6L50, 6L80E, 6L90E

Applies ToNoteStandard HoursWarranty HoursSkill Level
Gas/Ethanol,4WD, w/o Skid PlateIncludes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check.7.7C
Gas/Ethanol,4WD, w/Skid PlateIncludes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check.8.0C
Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation:
w/Two Piece Driveline add0.2C
Combination Procedure: CONVERTER: Drain & Test:
Gas/Ethanol0.2C
Combination Procedure: FLYWHEEL: Remove & Replace:
Gas/Ethanol0.3C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
Gas/Ethanol0.1C
Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace:
Gas/Ethanol0.2B
Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul:
Gas/Ethanol,4WD4.0A
Combination Procedure: TRANSFER CASE ASSEMBLY: Replace:
Gas/Ethanol,4WD0.3C
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
Gas/EthanolIncludes: Programming.0.8C
Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace:
Gas/Ethanol1.6B