LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2019 >> Sierra 1500 Limited Base, RWD, Gas >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install a plug into the wheel speed sensor hole in the wheel hub and bearing assembly.
  2. Thoroughly clean the wheel speed sensor mounting pad on the wheel hub and bearing assembly of any accumulated dirt, grease, and debris.
  3. Apply a light coat of wheel speed sensor anti-corrosion grease to the wheel speed sensor and mounting pad on the wheel hub and bearing assembly. Adhesives, Fluids, Lubricants, and Sealers
  4. GM3256102

    Install the front wheel speed sensor assembly to the wheel hub and bearing assembly.

    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the front wheel speed sensor bolt (1) and tighten to 13 N.m (115 lb in).
  6. GM3256100

    Secure the front wheel speed sensor harness retainers (2).

  7. Secure the front wheel speed sensor harness electrical connector (1) to the brake hose bracket.
  8. Connect the front wheel speed sensor electrical connector.
  9. Install the front brake rotor. Front Brake Rotor Replacement (JD9)Front Brake Rotor Replacement (J95)Front Brake Rotor Replacement (J96) .
  10. Install the tire and wheel assembly. Tire and Wheel Removal and Installation (6-Lug Wheel)Tire and Wheel Removal and Installation (8-Lug Wheel)Tire and Wheel Removal and Installation (Dual Rear Wheels) .
  11. Perform the diagnostic system check. Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals