LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Yukon SLE, 4WD, Gas >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
  2. Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement .
  3. Remove the BPMV bolt (1).
    Fig 1: BPMV Bolt
    GM3255837Courtesy of GENERAL MOTORS COMPANY
  4. Carefully separate the BPMV assembly from the BPMV bracket insulators and remove the BPMV bracket (1).
    Fig 2: BPMV Bracket
    GM3255841Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not pry on the accumulator caps on the underside of the BPMV.
  5. Inspect the insulators for damage and replace, if necessary.
scientia non olet · About LEMON Manuals