LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Terrain SL >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Battery Distribution Engine Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection (KL9)
    2. Fig 1: Fuse Block Cover
    GM4578539Courtesy of GENERAL MOTORS COMPANY
  2. Remove Fuse Block Cover (1)
    3. Fig 2: Starter Solenoid Cable And Nut
    GM4578541Courtesy of GENERAL MOTORS COMPANY
  3. Remove Starter Solenoid Cable Nut (1)
  4. Reposition Starter Solenoid Cable (2)
    5. Fig 3: Battery Positive Cable And Nut
    GM4578542Courtesy of GENERAL MOTORS COMPANY
  5. Remove Battery Positive Cable Nut (1)
  6. Remove the small wire.
  7. Remove Battery Positive Cable (2)
    8. Fig 4: Body Wiring Harness Connector
    GM4578545Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the body wiring harness connector. (1)
    9. Fig 5: Body Wiring Harness Terminals And Nuts
    GM4578546Courtesy of GENERAL MOTORS COMPANY
  9. Remove Body Wiring Harness Terminal Nut (1) (Qty: 4)
  10. Remove Generator and Starter Nut (2)
  11. Remove Wiring Harness Terminals (Qty: 5)
    12. Fig 6: Fuse Block Tabs
    GM4578547Courtesy of GENERAL MOTORS COMPANY
  12. Unclip the fuse block tabs (1) and remove from the battery.
scientia non olet · About LEMON Manuals