Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Operate the component: Rear Defogger Switch - Pressed
Verify the scan tool parameter: Rear Defogger Switch = Off & On
- If not the specified state
Replace the component: A26 HVAC Controls
- Go to next step: If the specified state
- If not the specified state
- Perform the scan tool control function: Rear Defogger - On and Off
Verify the component turns On and Off: E18 Rear Defogger Grid
- If the component does not turn On and Off
Refer to Circuit/System Testing below
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- Operate the component: Rear Defogger Switch - Pressed
- Verify the component turns On and Off: Rear Defogger Indicator
- If the component does not turn On and Off
Replace the component: A26 HVAC Controls
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.