Relay Test
- Ignition/Vehicle - Off
- Remove the component: KR5 Rear Defogger Relay
- Test for 70 to 110 Ω between the test points: Component terminal 1 & Component terminal 2
- If not between 70 and 110 Ω
Replace the component: KR5 Rear Defogger Relay
- Go to next step: If between 70 and 110 Ω
- If not between 70 and 110 Ω
- Test for infinite resistance between the test points:
- Component terminal 3 & 1
- Component terminal 3 & 5
- Component terminal 3 & 2
- Component terminal 2 & 5
- If less than infinite resistance
Replace the component: KR5 Rear Defogger Relay
- Go to next step: If infinite resistance
- Connect a 3 A fused jumper wire between the test points: Component terminal 2 & 12 V
Connect a jumper wire between the test points: Component terminal 1 & Ground
- Test for less than 2 Ω between the test points: Component terminal 3 & Component terminal 5
- If 2 Ω or greater
Replace the component: KR5 Rear Defogger Relay
- Go to next step: If less than 2 Ω
- If 2 Ω or greater
- All OK.