Circuit/System Verification
- Verify there is no debris on the B87 Rearview Camera lens and that the bezel and bezel seal are not damaged.
- If debris is found on the lens
Clean the lens using water and a soft cloth. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Go to next step: If there is no debris on the lens
- If debris is found on the lens
- Engine running, parking brake applied, transmission in REVERSE.
- Verify the backup lamps are illuminated.
- If the backup lamps are not illuminated
Refer to Backup Lamps Malfunction (Automatic Transmission)Backup Lamps Malfunction (Manual Transmission) .
- Go to next step: If the backup lamps are illuminated
- If the backup lamps are not illuminated
- Ignition ON. Verify P17 Info Display Module displays the home screen and radio information properly.
- If the P17 Info Display is not displaying properly
Refer to Radio Information Display Malfunction (IO5/IO6 Without MAH/MBC)
- Go to next step: If the P17 Info Display displays properly
- If the P17 Info Display is not displaying properly
- Engine running, parking brake applied, transmission in REVERSE.
- Verify a clear rear vision image is displayed on the P17 Info Display Module.
- If a clear image is not displayed
Refer to Circuit/System Testing.
- Go to next step: If a clear image is displayed
- If a clear image is not displayed
- All OK.
NOTE:
A poor quality image is an image that has flickering, blinking, excessively blue/yellow hue, and/or fog/haze such that it obstructs the driver's view out the rear of the vehicle.