LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 405 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Guide Pin Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Upper And Lower Brake Caliper Guide Pin
    GM4281754Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The upper brake caliper guide pin is equipped with a bushing and must be installed in the same position.

  1. Install Upper Brake Caliper Guide Pin (1)
  2. Install Lower Brake Caliper Guide Pin (2)
    3. Fig 2: Brake Caliper
    GM4281744Courtesy of GENERAL MOTORS COMPANY
  3. Install Brake Caliper (1)
    4. Fig 3: Brake Caliper Guide Pin Bolt
    GM4281743Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  4. Install Brake Caliper Guide Pin Bolt (1) and tighten 40 N.m (30 lb ft)
  5. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
scientia non olet · About LEMON Manuals