LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0575: Cruise Control Switch Signal Message Counter Incorrect >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no DTCs are set, except DTC P0575.
    • If only DTC P0575 is set 
  2. Replace the K9 Body Control Module.
  3. Verify DTC P0575 does not set when operating the vehicle within the Conditions for Running the DTC.
    • If the DTC sets 

      Replace the K20 Engine Control Module.

    • If the DTC does not set 
  4. All OK.