LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Front Parking Assist Alarm Sensor Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sensor Bracket/Fascia Mating Surface
    GM4371917Courtesy of GENERAL MOTORS COMPANY
  1. Apply structural adhesive epoxy (1), Lord Fusor™ 127EZ or equivalent, to fascia at mating surface.
    2. Fig 2: Sensor Bracket And Fascia
    GM4371937Courtesy of GENERAL MOTORS COMPANY
  2. Using the alignment tabs, install the sensor bracket (1) to the fascia.
  3. Allow adhesive to cure according to manufacturer's directions.
    4. Fig 3: Front Parking Assist Alarm Sensor
    GM4371867Courtesy of GENERAL MOTORS COMPANY
  4. Install Front Parking Assist Alarm Sensor (1)
  5. Connect the electrical connector.
  6. Install Front Bumper Fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals