Installation Procedure
Battery Positive Junction Block Cable (5) - Install
- Battery Positive Junction Block Cable Fastener (4) - Install and tighten 12 N.m (106 lb in)
- Lower Terminal Cover (3) - Install
- Battery Positive Junction Block Cable Fastener (2) - Install and tighten 12 N.m (106 lb in)
- Upper Terminal Cover (1) - Install
Close the battery fuse block cover. (2)
- Battery Distribution Fuse Block Retaining Tab (1) - Engage
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) Battery Negative Cable Disconnection and Connection (With KL9)
CAUTION:
Refer to Fastener Caution