LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Monitor Module Replacement (KL9) >> Installation Procedure

Installation Procedure

  1. GM4285192

    Battery Sensor Module (3) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
  3. Electrical Connector (2) - Connect
  4. GM4285190

    Battery Negative Cable (3) - Install

  5. Use an open ended wrench to hold the battery sensor ground tab, while tightening the battery negative cable nut. (2)
  6. Battery Negative Cable Nut (1) - Tighten 12 N.m (106 lb in)
scientia non olet · About LEMON Manuals