Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Axle Shaft Seals |
| Differential Adjuster Nut Lock Ring |
| Drive Pinion Gear Collapsible Spacer |
| Drive Pinion Gear Nut |
| Drive Pinion Gear Washer |
| Front Differential Carrier Gasket |
| Front Differential Carrier Cover Gasket |
| Front Drive Axle Inner Shaft Retaining Ring |
| Front Drive Axle Inner Shaft Seal |
| Pinion Gear Shaft Lock Pin |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Ring Gear Bolts - 8.25 Axle | 120 N.m (89 lb ft) |
| Ring Gear Bolts - 9.25 Axle | 138 N.m (102 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Differential Adjuster Lock Nut Bolt - 9.25 Clamshell Axle | 9 N.m (80 lb in) |
| Differential Carrier Assembly Case Bolts 8.25 Axle | 73 N.m (54 lb ft) |
| Differential Carrier Assembly Case Bolts 9.25 Axle | 47 N.m (35 lb ft) |
| Differential Carrier Assembly Mounting Bolts and Nuts - 8.25 Axle/9.25 Clamshell Axle/9.25 Inch HD Axle - Right Side | 100 N.m (74 lb ft) |
| Differential Carrier Assembly Mounting Bolts - 9.25 Inch HD Axle - Left Side | 110 N.m (81 lb ft) |
| Differential Carrier Bracket to Frame Nuts - 8.25 Axle/9.25 Clamshell Axle | 100 N.m (74 lb ft) |
| Differential Carrier Bracket to Frame Bolts - 9.25 Inch HD Axle | 160 N.m (118 lb ft) |
| Front Differential Carrier Shield Bolts | 20 N.m (15 lb ft) |
| Front Differential Housing Cover Bolt - 9.25 Inch HD Axle | 40 N.m (30 lb ft) |
| Front Drive Axle Actuator | 30 N.m (22 lb ft) |
| Inner Shaft Housing to Bracket Nuts | 100 N.m (74 lb ft) |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 8.25 Axle | 55 N.m (41 lb ft) |
| Inner Shaft Housing to Differential Carrier Assembly Bolts 9.25 Inch HD Axle | 80 N.m (59 lb ft) |
| Inner Shaft Housing to Differential Carrier Assembly Bolts - 9.25 Clamshell Axle | 40 N.m (30 lb ft) |
| Pinion Shaft Lock Bolt - 9.25 Axle | 53 N.m (39 lb ft) |
| Plug, Drain 9.25 Axle and Fill 8.25/9.25 Axle | 33 N.m (24 lb ft) |
| Plug, Drain 8.25 Axle | 45 N.m (33 lb ft) |
| Stabilizer Link Nut | 18 N.m (13 lb ft) |
| Vent Hose Connector | 28 N.m (21 lb ft) |
| Wheel Drive Shaft Inboard Flange Bolts | 79 N.m (58 lb ft) |
| Wheel Drive Shaft to Front Hub Nut | 240 N.m (177 lb ft) |
| Yoke Retainer Bolts | 25 N.m (18 lb ft) |