LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Shift Lock Control System) >> Diagnostic Information and Procedures >> DTC B270A: Park Lock Solenoid Control Circuit Short (With T4Z) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition ON.
  2. Verify the scan tool Brake Pedal Applied parameter changes from Inactive to Active when the brake pedal is applied.
    • If the Brake Pedal Applied changes 
  3. Verify the scan tool Driver Seat Belt Status and Passenger Seat Belt Status parameter changes between Buckled and Unbuckled when the seat belt is buckled and unbuckled.
    • If the Driver Seat Belt Status and Passenger Seat Belt Status parameter does not change 

      Refer to Symptoms - Seat Belts

    • If the Driver Seat Belt Status and Passenger Seat Belt Status parameter changes 
  4. Verify the S3 Transmission Shift Lever moves out of the PARK position when the brake pedal is applied.
      NOTE:

      Vehicles with the Safety Belt Assurance System, will not allow the vehicle to shift out of PARK if the driver and front outboard passenger, if present, do not have safety belt(s) buckled. Buckle the safety belt(s) to unlock the shifter. This system may not allow the vehicle to shift out of PARK if an object such as a briefcase, handbag, grocery bag, laptop, or other electronic devices is on the front outboard passenger seat. If this happens, remove the object from the seat or buckle the safety belt.

    • If the S3 Transmission Shift Lever does not move out of the PARK position 

      Refer to Circuit/System Testing.

    • If the S3 Transmission Shift Lever does move out of the PARK position 

      All OK.

scientia non olet · About LEMON Manuals