LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Canyon SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement (With ZR2) >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
    3. Fig 1: Front Wheelhouse Liner Bolt
    GM4774684Courtesy of GENERAL MOTORS COMPANY
  3. Remove Front Wheelhouse Liner Bolt (1) - Front Wheelhouse Liner Replacement (with ZR2)
  4. Carefully pull the lower edge of the wheelhouse liner outward to access the wheel speed sensor electrical connector.
    5. Fig 2: Electrical Connector
    GM4774685Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Front wheelhouse liner not shown for clarity.

  5. Disconnect Electrical Connector (1)
    6. Fig 3: Clip
    GM4774688Courtesy of GENERAL MOTORS COMPANY
  6. Release Clip (1)
    7. Fig 4: Retainer
    GM4774691Courtesy of GENERAL MOTORS COMPANY
  7. Release Retainer (1)
    8. Fig 5: Retainer
    GM4774692Courtesy of GENERAL MOTORS COMPANY
  8. Release Retainer (1)
    9. Fig 6: Front Wheel Speed Sensor Bracket Bolt
    GM4774695Courtesy of GENERAL MOTORS COMPANY
  9. Remove Front Wheel Speed Sensor Bracket Bolt (1)
    10. Fig 7: Front Wheel Speed Sensor Bolt
    GM4774698Courtesy of GENERAL MOTORS COMPANY
  10. Remove Front Wheel Speed Sensor Bolt (1)
    11. Fig 8: Front Wheel Speed Sensor
    GM4774701Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT pry or lever against the wheel speed sensor to remove.

  11. Remove Front Wheel Speed Sensor (1)
scientia non olet · About LEMON Manuals