Radio Scan Tool Information (IOB)
Radio Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Battery Voltage | Varies | The scan tool displays volts. This is the voltage at the input to the radio. |
| System Power Mode | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the current power mode of the radio. |
| Valet Mode | Inactive | Indicates if the system is in Valet mode. |
| Radio Theft Armed | Learned VIN | The scan tool displays Learned VIN or No VIN. This is the state of the VIN programming in the radio. |
| Radio Theft Locked | Inactive | The scan tool displays Active or Inactive. This is the state of the theft lock system. Active indicates the radio is locked. Inactive indicates the theft lock system is armed and the radio is unlocked. |
| Test Bench Mode | Inactive | The scan tool displays Active or Inactive. This parameter indicates if the radio is in bench or user mode. |
| Radio Power Button | Varies | Indicates if the Radio Power button is in the ON or OFF state. |
| End Model Part Number | Varies | End Model Part Number is the part number for the hardware of the control module with software and calibrations. |
| Base Model Part Number | Varies | Base Model Part Number is the part number for the hardware without software and calibrations. |
| Boot Software Part Number | Varies | The scan tool displays the boot software ID number. |
| Calibration Part Number 1 | Varies | The scan tool displays the software module ID 1. |
| Calibration Part Number 2 | Varies | The scan tool displays the software module ID 2. |
| Calibration Part Number 3 | Varies | The scan tool displays the software module ID 3. |
| Calibration Part Number 4 | Varies | The scan tool displays the software module ID 4. |
| Calibration Part Number 5 | Varies | The scan tool displays the software module ID 5. |
| Calibration Part Number 6 | Varies | The scan tool displays the software module ID 6. |
| Calibration Part Number 7 | Varies | The scan tool displays the software module ID 7. |
| Calibration Part Number 8 | Varies | The scan tool displays the software module ID 8. |
| Calibration Part Number 9 | Varies | The scan tool displays the software module ID 9. |
| Calibration Part Number 10 | Varies | The scan tool displays the software module ID 10. |
| Vin Digits 2-17 | Varies | The scan tool displays the learned VIN digits 2-17. |
Radio Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Left Front Speaker | This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker. |
| Left Rear Speaker | This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker. |
| Right Front Speaker | This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker. |
| Right Rear Speaker | This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker. |
| Chime Function Test | This output command is used to command the chime ON and OFF. |
| Rear Camera Display Control | This output control will command the rear camera display ON and OFF. Commending the rear camera on will display the rear camera image on the info display screen. |
| Rear Park Assist Steering Wheel Position Control | This output control will command the rear park assist steering wheel position ON and OFF. Commanding the rear park assist steering wheel position ON will display the steering wheel position guide lines on the info display screen. |