Circuit/System Testing
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF.
- Verify the LVDS interface cable is properly connected at the P17 Info Display Module and the A11 Radio connections and there is no damage to the cable or connections.
- Ignition ON/Vehicle in Service Mode, infotainment system ON.
- Verify the P17 Info Display Module does not display an image.
- If the P17 Info Display Module displays an image.
All OK.
- If the P17 Info Display Module does not display an image.
- If the P17 Info Display Module displays an image.
- Vehicle OFF/Ignition OFF.
- Disconnect the LVDS interface cable from the P17 Info Display Module.
- Connect the EL-50334-2 Type A female to Mini B male USB Cable to the P17 Info Display Module. Connect the EL-50334-14 Infotainment Test Cable to the adapter.
- Disconnect the LVDS interface cable from the A11 Radio. Connect the EL-50334-14 Infotainment Test cable to the A11 Radio.
- Ignition ON/Vehicle in Service Mode, infotainment system ON.
- Verify the P17 Info Display Module displays an image.
- If the P17 Info Display Module does not display an image
- Replace the P17 Info Display Module. Connect all harness connectors.
- Ignition ON, infotainment system ON.
- Verify the P17 Info Display Module displays an image.
- If the P17 Info Display Module still does not display an image, replace the A11 Radio.
- If the P17 Info Display Module displays an image.
- All OK.
- If the P17 Info Display Module displays an image.
- Replace the vehicle LVDS interface cable from the P17 Info Display Module to the A11 Radio.