LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement (AWD) >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief 
  2. Drain the fuel tank. Refer to Fuel Tank Draining 
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove Driveline Torque Tube. Refer to Driveline Torque Tube Replacement
    5. Fig 1: Wiring Harness, Fuel Tank Filler Hose, Clamp And Canister Vent Hose
    GM4298736Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect Wiring Harness (1)
  6. Remove Fuel Tank Filler Hose Clamp (2)
  7. Remove Fuel Tank Filler Hose (3)
  8. Disconnect Evaporative Emission Canister Vent Hose (4). Refer to Plastic Collar Quick Connect Fitting Service 
    9. Fig 2: Fuel Pump Fuel Feed Hose And Canister Vent Hose
    GM4298739Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect Fuel Pump Fuel Feed Hose (1). Refer to Plastic Collar Quick Connect Fitting Service 
  10. Disconnect Evaporative Emission Canister Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
    11. Fig 3: Fuel Tank Straps And Bolts
    GM4298741Courtesy of GENERAL MOTORS COMPANY
  11. Place a suitable adjustable jack under the fuel tank.
  12. Remove Fuel Tank Strap Bolts (1) (Qty: 4)
  13. Remove Fuel Tank Straps (2) (Qty: 2)
    14. Fig 4: Fuel Tank
    GM4298742Courtesy of GENERAL MOTORS COMPANY
  14. Remove Fuel Tank (1)
  15. If replacing fuel tank transfer parts as necessary.
scientia non olet · About LEMON Manuals