LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Fuel Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief 
    2. NOTE:

    It is NOT necessary to completely remove the intake manifold to gain access to the fuel injection fuel rail fuel pressure sensor.

  2. Reposition Intake Manifold. Refer to Intake Manifold Replacement
  3. Reposition Fuel Injection Fuel Rail Noise Shield. Refer to Fuel Injection Fuel Rail Noise Shield Replacement 
    4. Fig 1: Fuel Injection Fuel Rail, Fuel Rail Pressure Sensor And Electrical Connector
    GM4093213Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect Electrical Connector (1) @ Fuel Injection Fuel Rail Fuel Pressure Sensor (2)
    5. CAUTION:

    Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .

    NOTE:
    • Do NOT apply force to the plastic housing of the fuel injection rail fuel pressure sensor. ONLY apply force to the attached hexagon.
    • Some fuel may leak from the fuel injection fuel rail fuel pressure sensor orifice after the sensor is removed. Dry the area around the orifice using a lint free cloth.
    • After removal, the area around the fuel rail fuel pressure sensor sealing surface should be inspected. The surface should be free of fuel, dirt, debris, and burrs.
  5. Remove and DISCARD Fuel Injection Fuel Rail Fuel Pressure Sensor (2) @ Fuel Injection Fuel Rail (3)
scientia non olet · About LEMON Manuals