LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Window Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Glass and Sheet Metal Handling Warning .

    WARNING:

    Refer to Cracked Window Warning .

    NOTE:

    Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

    Fig 1: Rear Window Wiper Arm
    GM4364403Courtesy of GENERAL MOTORS COMPANY
  1. Remove Rear Window Wiper Arm (3) - Rear Window Wiper Arm Replacement
  2. Cover the seats and carpeting to protect from broken glass.
  3. Open the liftgate.
    4. Fig 2: Liftgate Lower Trim Finish Panel
    GM4375596Courtesy of GENERAL MOTORS COMPANY
  4. Remove Liftgate Lower Trim Finish Panel (1) - Liftgate Lower Trim Finish Panel Replacement
  5. Disconnect the electrical connectors.
    6. NOTE:

    Keep the cutting edge of the tool against the rear window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.

  6. Use BO 39032  stationary glass removal tool or equivalent in order to remove the window.
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    7. Fig 3: Rear Window
    GM4399825Courtesy of GENERAL MOTORS COMPANY
  7. Remove Rear Window (1)
scientia non olet · About LEMON Manuals