LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Yukon SLT, RWD, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Antilock Brake System) >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheel Speed Sensor
    GM4138374Courtesy of GENERAL MOTORS COMPANY
  1. Install Wheel Speed Sensor (1).
    2. Fig 2: Wheel Speed Sensor Bolt
    GM4138372Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  2. Install Wheel Speed Sensor Bolt (1) and tighten 13 N.m (115 lb in)
    3. Fig 3: Wheel Speed Sensor Harness Clip
    GM4138369Courtesy of GENERAL MOTORS COMPANY
  3. Secure Wheel Speed Sensor Harness Clip (1)
    4. Fig 4: Wheel Speed Sensor Harness Clip
    GM4138368Courtesy of GENERAL MOTORS COMPANY
  4. Secure Wheel Speed Sensor Harness Clip (1)
  5. Secure Wheel Speed Sensor Harness Clip (2)
    6. Fig 5: Wheel Speed Sensor Harness Clip
    GM4138367Courtesy of GENERAL MOTORS COMPANY
  6. Secure Wheel Speed Sensor Harness Clip (1)
  7. Secure Wheel Speed Sensor Harness Clip (2)
  8. Connect Wheel Speed Sensor Electrical Connector
  9. Install Front Brake Rotor Front Brake Rotor Replacement (JD9)Front Brake Rotor Replacement (J95)
  10. Perform the vehicle diagnostic system check. Diagnostic System Check - Vehicle
scientia non olet · About LEMON Manuals