Power Steering Control Module Scan Tool Information
The power steering control module scan tool data parameters list contains all power steering related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.
Power Steering Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Vehicle Speed | - | Varies | Displays the current vehicle speed in mph (km/h). |
| System Voltage | - | 9-16 V | Current battery voltage. |
| Steering Wheel Angle | - | -2048° - 2048° | This displays the current steering wheel angle in degrees. |
| Steering Wheel Input Torque | - | Varies | This displays. This displays the current steering input torque in. |
| Calculated System Temperature | - | -256 -255.992 ° C | This displays the current calculated system temperature in ° C |
| Power Steering Control Module Center Procedure | - | Incomplete/Complete | This displays the current status of the centering procedure. |
| Power Steering Softstops Learn Status | - | Not Learned/Learned | This displays the current status of the softstops learn. |
| Worm Gear Wear Counter Copied | - | Yes/No | This displays whether or not the worm gear wear counter was copied. |
| Worm Gear Wear Counter | - | Varies | This displays the current percentage (%) of wear on the worm gear. |