LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Repair Instructions) >> Repair Instructions >> Fuse Block Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Generator Cable And Cable Nut
    GM3766063Courtesy of GENERAL MOTORS COMPANY
  2. Open the fuse block cover.
  3. Remove the starter and generator cable nut (1).
  4. Reposition the starter and generator cable (2).
    5. Fig 2: Positive Battery Cable Nut
    GM3766064Courtesy of GENERAL MOTORS COMPANY
  5. Remove the positive battery cable nut (1).
  6. Loosen the positive battery cable nut and remove cable (2).
    7. Fig 3: Engine Wiring Harness Junction Block Cable Nut
    GM3766065Courtesy of GENERAL MOTORS COMPANY
  7. Remove engine wiring harness junction block cable nut (1).
  8. Remove the fuse block wiring harness terminal nuts (2).
  9. Reposition the wiring harness terminals (3).
    10. Fig 4: Fuse Block Tabs
    GM3766066Courtesy of GENERAL MOTORS COMPANY
  10. Unclip the fuse block tabs (1) and remove from the battery.
scientia non olet · About LEMON Manuals