LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LWN) >> Installation Procedure

Installation Procedure

    Fig 1: Starter Mounting Bolt
    GM4143721Courtesy of GENERAL MOTORS COMPANY
  1. Install Starter (2)
    2. CAUTION:

    Refer to Fastener Caution

  2. Install Starter Mounting Bolt (1) and tighten 58 N.m (43 lb ft)
    3. Fig 2: Fuel Pump Fuel Feed Pipe Bracket Bolt
    GM4339363Courtesy of GENERAL MOTORS COMPANY
  3. Install Fuel Pump Fuel Feed Pipe Bracket (1)
  4. Install Fuel Pump Fuel Feed Pipe Bracket Bolt (2) and tighten 22 N.m (16 lb ft)
    5. Fig 3: Starter Solenoid Cable Nut And Cable
    GM4143720Courtesy of GENERAL MOTORS COMPANY
  5. Install Starter Solenoid Cable (2)
  6. Install Starter Solenoid Cable Nut (1) and tighten 12 N.m (106 lb in)
  7. Connect the electrical connector (3).
  8. Install Oil Level Indicator Tube.Oil Level Indicator Tube Replacement
  9. Install Front Wheelhouse Liner.Front Wheelhouse Liner Replacement
  10. Lower the vehicle.
  11. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals