Removal Procedure
- Record all of the radio station presets.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the battery positive post clamp nut (2).
- Remove battery positive terminal (1) at the fuse block.
- Disconnect retainers (3) holding battery positive cable (4).
- Remove generator nut (1) from the generator B+ stud.
- Remove the starter solenoid nut (2).
- Remove the battery positive (Starter) cable (4) and the battery positive (Generator) cable (5) from the vehicle.
- Remove the retainers (3) holding the battery positive cables to the engine.NOTE:
Observe how the battery positive cable was routed within the engine compartment.