LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2015 >> Canyon SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Retaining Clips
    GM3683665Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the wheel speed sensor harness electrical connector.
  3. Release the wheel speed sensor harness from the retaining clips (1) on the vehicle frame.
    4. Fig 2: Wheel Speed Sensor Harness Clip
    GM3683666Courtesy of GENERAL MOTORS COMPANY
  4. Release the wheel speed sensor harness clip (1) from the rear axle.
    5. Fig 3: Rear Wheel Speed Sensor Bolt
    GM3683667Courtesy of GENERAL MOTORS COMPANY
  5. Thoroughly clean the wheel speed sensor mounting area of the rear axle of any dirt and debris.
  6. Remove the rear wheel speed sensor bolt (1).
  7. Carefully remove the wheel speed sensor from the rear axle by pulling straight outward.
scientia non olet · About LEMON Manuals