LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Terrain SLT, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Programming And Setup - All Systems) >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Garage Height Calibration

Garage Height Calibration

WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

  1. Ensure that the rotary switch on the overhead console is set to Garage.
  2. Open the liftgate to the desired height manually or by using the one of the following switches:
    • The rotary switch on the overhead console
    • The unlatch switch on the liftgate handle
    • The remote control switch on the key fob
  3. Hold the shutface switch for at least 3 seconds with the liftgate at the desired height.
  4. Close the liftgate completely using one of the following switches:
    • The rotary switch on the overhead console
    • The shutface switch on the liftgate
    • The remote control switch on the key fob
scientia non olet · About LEMON Manuals