Circuit/System Verification
WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to Diagnostic Aids before performing Circuit/System Verification below.
- Observe the scan tool Lane Departure Warning Switch Status parameter while pressing the lane departure warning switch. The parameter should change between OPEN and CLOSED.
- If the parameter does not change between the specified values, refer to Lane Departure Warning Switch Malfunction in Circuit/System Testing below.
- Observe the switch indicator while cycling the lane departure warning switch. The indicator should turn ON and OFF when cycling between the commanded states.
- If the indicator does not turn ON and OFF, refer to Lane Departure Warning Switch Indicator Malfunction in Circuit/System Testing below.
- Inspect the area of the K109 Front View Camera Module for contamination.
- If it needs to be cleaned, clean the windshield.