Rear Differential Clutch Control Module Scan Tool Information
Rear Differential Clutch Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition is ON, engine OFF, vehicle stationary | |||
| Battery Voltage | - | Varies | The scan tool displays volts. The scan tool displays the battery voltage monitored by the module. |
| Clutch Control Module Calibration Identification | - | Varies | The scan tool displays the rear differential clutch control solenoid 2 digit matching ID code. |
| Left Front Wheel Speed Sensor | - | 0.0 KPH/MPH | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Left Rear Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Rear Differential Clutch Solenoid Valve Current | - | 0.0 A | The scan tool displays Amps. The scan tool displays the applied current to the rear differential clutch control solenoid. |
| Rear Differential Clutch System Disable Info | - | Normal Function | The scan tool displays Normal Function/LF wheel speed /RF wheel speed/LR wheel speed/RR wheel speed. |
| Rear Drive Clutch Status | - | Temporarily Limited | The scan tool displays Normal/Temporarily Disabled/Temporarily Limited/Malfunction/Externally Disabled. |
| Right Front Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
| Right Rear Wheel Speed Sensor | - | 0.0 | The scan tool displays 0-160 km/h (0-99.5 mph). |
Rear Differential Clutch Control Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Rear Differential Clutch Torque Command | This function will command the rear differential clutch torque Up and Down. |