Installation Procedure

WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: BPMV Bracket

Courtesy of GENERAL MOTORS COMPANY

Install the BPMV bracket (1).

Fig 2: BPMV Bracket Bolt

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Refer to Fastener Caution .

Install the BPMV bracket bolt (1) and tighten to 10 N.m (89 lb in).

Fig 3: BPMV Bracket Nuts

Courtesy of GENERAL MOTORS COMPANY

Install the BPMV bracket nuts (1) and tighten to 10 N.m (89 lb in).

Fig 4: BPMV Assembly

Courtesy of GENERAL MOTORS COMPANY

Carefully position the BPMV assembly (1) to the BPMV bracket insulators.

Fig 5: BPMV Bolt

Courtesy of GENERAL MOTORS COMPANY

Install the BPMV bolt (1) and tighten to 10 N.m (89 lb in).
Install the accessory wiring junction block. Refer to Accessory Wiring Junction Block Replacement .