LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Terrain Denali, 4D Utility >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement (LFX) >> Removal Procedure

Removal Procedure

  1. Record all of the radio station presets.
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the ECM mounting bracket.
    4. Fig 1: Identifying Battery Positive Terminal Components
    GM2240863Courtesy of GENERAL MOTORS COMPANY
  4. Remove the battery positive post clamp nut (2).
  5. Remove the battery retainer bracket and the battery. Refer to Battery Replacement .
  6. Remove battery positive terminal (1) at the fuse block.
  7. Disconnect retainers (3) holding battery positive cable (4).
    8. Fig 2: Identifying Battery Positve Cable Components
    GM2240864Courtesy of GENERAL MOTORS COMPANY
  8. Remove generator boot (1) and nut (2) from the generator B+ stud.
  9. Remove the starter solenoid nut (3).
    10. NOTE:

    Observe how the battery positive cable was routed within the engine compartment.

  10. Remove the battery positive (Starter) cable (4) and the battery positive (Generator) cable (5) from the vehicle.
scientia non olet · About LEMON Manuals