LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Sierra 2500 HD SLT, 6.6L Eng VIN 8, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2622 (Wiring Systems And Power Management - Component Connector End Views - Drive Motor Generator Battery Control Module To Fuel Pump Disable Module) >> Component Connector End Views >> Fuel Pump Disable Control Module (LC8)

Fuel Pump Disable Control Module (LC8)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Sierra 3500 HD, 2013 GMC Sierra 2500 HD, 2013 GMC Sierra 1500, 2013 Chevrolet Silverado 3500 HD, and 2013 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
  • Harness Type: CNG Harness
  • OEM Connector: Service by Harness- See Part Catalog
  • Service Connector: Not Available
  • Description: Not Available
Terminal Part Information
  • Terminated Lead: Service by Harness- See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp:Not Available
Fuel Pump Disable Control Module (LC8)

Pin Wire Circuit Function
1 GN - Battery Positive Voltage
2 BK - Ground
3 GY - OEM Fuel Pump Voltage (IN)
4 GY/BK - OEM Fuel Pump Voltage (OUT)
5 - - Not Available
6 PU/BK - OEM Fuel Level Sensor Signal (IN)
7 RD/WH - 5-Volt Output
8 - - Not Available
9 BU/RD - CNG Tank Temperature Sensor Signal
10 GN/WH - CNG Switched 12 Volt Signal
11 GN - Battery Positive Output CNG Cut-Off Solenoid Valve #1
12 BK - Ground
13 GY - Battery Positive Output CNG Cut-Off Solenoid Valve #2
14-15 - - Not Available
16 PU - OEM Fuel Level Sensor Signal (OUT)
17 RD/WH - 5-Volt Reference Signal From CNG Module
18 - - Not Available
19 BU/RD - CNG Tank Temperature Output to CNG Module
20 - - Not Available