Setup for Component Replacement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Sierra 3500 HD, 2013 GMC Sierra 2500 HD, 2013 GMC Sierra 1500, 2013 Chevrolet Silverado 3500 HD, and 2013 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to Crankshaft Position System Variation Learn , for the V6, Crankshaft Position System Variation Learn , for the V8, or Crankshaft Position System Variation Learn for the Hybrid.
- Engine replacement
- Any engine repair that disturbs the crankshaft position (CKP) sensor or its relationship with the crankshaft reluctor wheel
- CKP sensor
If the throttle body is replaced, a Throttle Learn procedure must be performed. Refer to Q38 Throttle Body: Throttle/Idle Learn , for the V6, Q38 Throttle Body: Throttle/Idle Learn , for the V8, or Q38 Throttle Body: Throttle/Idle Learn for the Hybrid.