LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Sierra 2500 HD SLT, 6.6L Eng VIN 8, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2503 (Programming And Setup - All Systems) >> Repair Instructions >> Auxiliary Body Control Module Programming and Setup >> Enabling the Inclination Sensor - Export

Enabling the Inclination Sensor - Export

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Sierra 3500 HD, 2013 GMC Sierra 2500 HD, 2013 GMC Sierra 1500, 2013 Chevrolet Silverado 3500 HD, and 2013 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Perform auxiliary BCM special function "Enable inclination sensor".

IMPORTANT:

After programming, perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON, with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
scientia non olet · About LEMON Manuals