Fuel Temperature Sensor Replacement

Fig 1: Fuel Temperature Sensor (Injection Pump)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2) , Battery Negative Cable Disconnection and Connection (Single Battery) . Remove the intake manifold tube. Refer to Intake Manifold Tube Replacement . Remove the center intake manifold. Refer to Center Intake Manifold Replacement .
1	Fuel Temperature Sensor CAUTION: Refer to Component Fastener Tightening Caution . Procedure Disconnect the electrical wiring harness connector from the fuel temperature sensor. Tighten 28 N.m (20 lb ft)

Callout

Component Name

Preliminary Procedure

Fuel Temperature Sensor

CAUTION:

Procedure
Disconnect the electrical wiring harness connector from the fuel temperature sensor.
Tighten
28 N.m (20 lb ft)