LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Yukon Base, 4WD >> Repair and Diagnosis >> General Information >> Identification >> General Information >> Introduction >> Lifting and Jacking the Vehicle >> Jacking

Lifting and Jacking the Vehicle: Jacking

When you are lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide additional support.

Under the Frame Rails 

Fig 1: Frame Rail Jacking Point
GM630833Courtesy of GENERAL MOTORS COMPANY
NOTE:

The floor jack pad must not contact rocker panel or the floor pan.

Position the floor jack pad under the frame rail pad.

Under the Rear Differential 

Fig 2: Rear Differential Lifting Point
GM630834Courtesy of GENERAL MOTORS COMPANY

Position the floor jack pad under the center of the rear axle differential.

Do not damage the establisher bar.

Under the Rear Spring Hanger 

Fig 3: Rear Spring Hanger Lifting Point
GM630835Courtesy of GENERAL MOTORS COMPANY

Position the jack under the rear spring hanger.