LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> Steering >> Steering Linkage System >> Repair Instructions >> Pitman Arm Replacement >> Installation Procedure

Installation Procedure

  1. Install the pitman arm onto the steering gear.
    2. Fig 1: View Of Steering Gear And Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install a new pitman arm washer (2) and nut (1) and tighten to 370 N.m (273 lb ft).
  3. Remove the steering gear from the vise.
  4. Install the steering gear. Refer to Steering Gear Replacement (Hydraulic Rack and Pinion) , Steering Gear Replacement (HP2) , Steering Gear Replacement (L96) , Steering Gear Replacement (6.6L) .
  5. Adjust the front toe. Refer to Wheel Alignment Measurement , and/or Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
scientia non olet · About LEMON Manuals